Analysis of fault phenomenon of pillow packaging machine

Possible reasons for the failure of the pillow packaging machine: 1. There is no packaging film; -----Solution: replace with a new packaging film. 2. Possible cause of system failure: controller self-check failure. -----Solution: Contact the supplier; if the fault has been eliminated, just press the ESC key and the system will automatically reply to the running screen. Pillow packaging machine failure phenomenon: 1. The cutting position deviates from the color code 2. The cutter cuts on the product 3. There are scorch marks at the sealing part 4. The sealing is not strong or leaking 5. The temperature gauge cannot control the temperature. Analysis of common failure causes of pillow packaging machine: 1. The color mark tracking is not turned on, the color of the film color mark is too light, and the film drive slips. 2. The push rod and the cutter are not synchronized, the knife seat is too high or too low, and the packaging speed is too fast. 3. The temperature is too high, the speed is too slow, and the heat resistance of the outer layer of the coating is poor. 4. The temperature is too low, the speed is too fast, and the heat sealability of the inner layer of the coating is poor. 5. The heating element is damaged, the solid state relay is burned out, the thermocouple is damaged, and the temperature control table is damaged. Pillow packing machine elimination method: 1. In the tracking mode interface of the man-machine interface, switch the tracking mode to 'tracking cut'; refer to the manual of the random electric eye, adjust the sensing sensitivity of the electric eye; adjust the pressure of the glue stick or the tightness of the brake. 2. Refer to the manual to adjust the position of the push finger; adjust the height of the end sealing parts so that the meshing center of the sealing knife is in the middle of the product height; reduce the packaging speed. 3. Adjust the temperature; adjust the speed; change the film material. 4. Replace the heating element, replace the solid state relay, replace the galvanic couple, and replace the temperature control table.

However, automatic packaging machinery isn't the only producer in domestic, and many people feel that Ruian Lead Machinery & Technology Co., Ltd.'s service leaves much to be desired in terms of functionality and design.

At Ruian Lead Machinery & Technology Co., Ltd., we make sure everything we do honors that connection – from our commitment to the highest quality in the world, to the way we serve our customers and communities to do business responsibly. We are looking forward to becoming trusted supplier of every customer, inquire us at Lead Machinery!

Ruian Lead Machinery & Technology Co., Ltd. might focus its marketing efforts by highlighting its end product—improved technology and increased profits—not its producing methods.