Correct maintenance method for large vertical packaging machine

The correct maintenance method for large vertical packaging machines. Today’s era is an era of automation. Various packaging equipment has gradually entered the ranks of automation, and our powder packaging machines are not far behind. Therefore, large vertical packaging machines and eye drops filling lines have been launched. The unanimous recognition of large enterprises has also been widely invested in the market, which has greatly helped enterprises save labor costs and improve production quality. The advanced automation mode not only effectively improves the production efficiency of enterprises, but also better guarantees the quality of product packaging. Therefore, large vertical packaging machines and eye drops filling lines have become one of the packaging equipment of major companies, but there are often many companies that do not understand the importance of machine maintenance and maintenance methods. The powder packaging machine must pay attention to daily maintenance and maintenance, because this will not only extend the service life of the equipment, but also the equipment itself will not malfunction and so on. So for the maintenance and maintenance of the packaging machine, I will provide you with a few suggestions: 　　 1. Add oil lubrication: It is necessary to regularly add oil lubrication to the gear meshing part, the oil hole of the seated bearing and the moving parts. Once every shift, the reducer is strictly prohibited to run without oil. When adding lubricating oil, be careful not to put the oil tank on the rotating belt to prevent slipping and loss of rotation or premature aging of the belt and damage. Another point that must be noted is that the reducer must not be operated when it is out of oil, and after the first 300 hours of operation, clean the interior and replace it with new oil, and then change the oil every 2500 hours of operation. When adding lubricating oil, do not drop the oil on the transmission belt, because this will cause the powder packaging machine to slip and lose rotation or the belt will be prematurely aging and damaged. 2. Frequent cleaning: clean the metering part in time after the machine is stopped, and the heat-sealing device body must be cleaned frequently, especially for some packed materials with high sugar content in granules, cleaning the turntable and the discharge door, and the heat-sealing device body is also required The parts that are frequently cleaned to ensure that the sealing lines of the packaged product are clear. The scattered materials should be cleaned up in time to facilitate the cleanliness of the parts, so as to better extend their service life. At the same time, the dust in the electric control box should be cleaned frequently. To prevent electrical failures such as short circuits or poor contact. 3. Machine maintenance: Maintaining a large vertical packaging machine is one of the keys to prolonging the life of the packaging machine. Therefore, it is necessary to check the screws of each part of the powder packaging machine frequently, and there must be no looseness, otherwise it will affect the normal operation of the whole machine. , For the electrical parts, attention should be paid to waterproof, moisture-proof, anti-corrosion, and anti-mouse to ensure that the inside of the electric control box and the wiring terminals are clean to prevent electrical failure. After the shutdown, the two heat sealers should be in the open position , To prevent scalding the packaging materials.

The importance of automatic packaging machinery has increased as flexo machine manufacturer have become a must in our daily life.

Lead Machinery is the vital link in the supply chain, adding value with efficient and cost-effective service and solutions for our customers and our suppliers.

To ensure desired results, it is very essential that you get the right kind of from a certified provider..