Installation instructions for heat shrink packaging machine

Installation instructions for heat shrink packaging machine: 1. The heat shrink packaging machine and the winding machine consume a lot of power, so the power of the input power must be greater than the nominal power on the nameplate of the shrink machine, otherwise it is easy to burn the lines or electrical components. 2. Like the baler, the machine must be grounded reliably to protect personal safety. 3. Each machine is shipped with a power cable connected to the power supply. The terminal lead part has the identification symbol of the power supply, which must be connected correctly. Illegal operation may lead to electric shock. 4. When the specified voltage of the machine is three-phase 380V power supply, the zero line must be input at the same time, that is, the standard three-phase four-wire system other packaging equipment is also similar to the vacuum packaging machine. Otherwise, the machine cannot work normally, and it is easy to burn the internal electrical components. 5. The machine must be installed horizontally, otherwise the service life of the electric heating tube will be shortened. For machines with mesh belt conveying, the inclined installation will cause the conveyor belt to be off-center. 6. When the machine is used continuously for more than three months, the temperature-resistant wires in the shrinkage chamber should be checked and replaced as appropriate according to the degree of aging. 7. When the machine is working, the operator's palm and other parts are not allowed to contact the operating parts of the machine, especially the temperature inside the shrink chamber is extremely high, which is easy to burn. 8. After the packaging work is completed, the heating switch should be turned off first, and the conveying motor and the fan motor should continue to run for about 10 minutes, and then the entire power supply should be cut off.

Ruian Lead Machinery & Technology Co., Ltd. shows how effective market design can encourage participation, reduce gaming, and aggregate information, in order to improve liquidity, efficiency, and equity in markets.

Ruian Lead Machinery & Technology Co., Ltd.’s sole aim is to provide exquisite and unheard of features to the concept of producing technology.

In various different types of packing machine factory, modeling clay packing machine automatic packaging machinery is one of the most commonly used.

have three basic components.

To strengthen and grow our leadership position by providing automatic packaging machinery across a range of market segments, including automatic tableware packaging machine, and high-performance servers.