Process flow of heat shrinkable film packaging machine

Process flow of heat shrinkable film packaging machine: 1. First, set the heating time for the machine. 2. After pressing the manual or automatic button, the solenoid valve of the rack and cylinder is powered to drive the gear, and the gear drives the chain. At this time, the rack and cylinder are in the rear position. Proximity switch disconnected. When the rack cylinder runs to the top dead center, the front proximity switch of the rack cylinder is turned on, and the solenoid valve of the drying oven cylinder is energized and output. 3. When the oven cylinder runs to the top dead center, the timer starts and starts to delay, and the solenoid valve of the rack cylinder is powered off. 4. When the timing is over, the solenoid valve of the oven cylinder is powered off. 5. According to the work mode flag, decide whether to continue the next work flow.

automatic packaging machinery wrapping machine manufacturers has gained a lot of popularity over the recent past.

Ruian Lead Machinery & Technology Co., Ltd. promises you that you will be satisfied with our service.

Ruian Lead Machinery & Technology Co., Ltd. always think about our customer first. To determine what the consumers would want out of their relationship on social, and work from there.