Shanghai liquid filling machine cleaning method

In the application of the drilling process, workers need to start to maintain the internal scheduling of the machine and the cleanliness of the structural filling parts, such as the gas-water separator and the glass accumulation on the filter must have mineral oil, use an air gun to blow compressed air to stop drilling These parts. When checking the engine oil regularly, the oil mist must last at least one third. In the unloading piston filling machine or barrel, the ring is easy to wear. Once there is a need for wear, it should be replaced in time. When cleaning the filling machine, it is necessary to prevent the dust on the machine from being handled by harder things to prevent the formation of scratches. Then there is the lack of machinery. Do not disassemble randomly, because it will affect the use effect of the filling machine. It must be dismantled and must be completed by professionals. As for the oil stains on the filling machine, first stop scrubbing with alcohol to keep the stainless steel body bright. Mechanical one-way valves, stainless steel three-way and material tanks should be disassembled and cleaned frequently. Apply the cleaning agent evenly to the outside of the filling machine, and then gradually wipe it with a damp cloth to clean the body of the filling machine. Finally, use a sponge to suck the liquid outside the filling machine. Wait until the machine is naturally dried in the air. Objects such as valves that often pass through water flow are difficult to remove due to the formation of scale. Ultrasonic cleaning can be used, which is very efficient.